Regal 2000 Owner's Manual download pdf (Page 217)

100

101

5-7

9. Now connect the black

negative (

-) cable to

the good battery’s

negative (-) terminal.

Don’t let the other end

touch anything until the

next step. The other

end of the negative (

cable doesn’t go to the

dead battery.

It goes to a heavy, unpainted metal part on the

engine of the vehicle with the dead battery.

10. Attach the cable at least 18 inches (45 cm) away

from the dead battery, but not near engine parts that

move. The electrical connection is just as good

there, but the chance of sparks getting back to the

battery is much less.

11. Now start the vehicle with the good battery and run

the engine for a while.

12. Try to start the vehicle with the dead battery.

If it won’t start after a few tries, it probably

needs service.

13. Remove the cables in reverse order to prevent

electrical shorting. Take care that they don’t touch

each other or any other metal.

14. Be sure to reinstall the remote positive (+) jump

starting terminal plastic cap on your vehicle.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 348 349

Comments to this Manuals

No comments

Regal 2000 Owner's Manual Page 217

Comments to this Manuals